PULSE AUTOCYCLE NETWORK

Pulse 34 currently has a 400 for an engine. I've been thinking of turning it into an electric vehicle. The only thing I don't like is the limitation on distance.

I've been thinking about making ...

That's for the reply. I didn't need a contact breaker after all. I thought I was going to have to cut off my current cover. Turns out I just needed a 45 degree drill angle to drill out a anti-tampe ...

I figured out the screw was not twisted off. There is an anti-tamper plug that's inserted. Just had to drill it out. I found a 45 degree attachment for my drill and was able to drill out the plug. ...

Does anyone have this engine that's being parted out? I'm looking for a contact breaker cover.

Thanks.
Erick

Today, I was looking at the contact breaker cover. Was wondering if I could just cut off the cover? That would save me any issue about getting the engine lifted and keeping it stabelized. I can get ...

Hey guys,

I came across an issue when removing the contact breaker cover. My manual shows I need to remove two cross head screws. However, it looks like one of the screws was twisted off (not by ...

That looks amazing. I was going to update my power plant to the Ninja 650 but now I might have to rethink this.

That looks amazing. I was going to update my power plant to the Ninja 650 but now I might have to rethink this.

I finally found the problem. I feel like an idiot but I found it. I found a cable coming out of the engine, next to the kick starter, was not connected to the battery ground. This cable came up fro ...

What would be the best way to test the starter? Maybe I have a bad starter.

Well, the replacement solenoid didn't work. Still no power to guages and I hear a click when I turn the ignition switch.

I'm going to try a new ignition switch. If that doesn't work, I'll have t ...

I'm going to get a used solenoid from a local used bike shop here in the Dallas-Fort Worth area. Should have it by Tuesday or Wednesday. Only going to cost $25. That's more like it.

The solenoid tested bad, so I checked out a replacement. A new one will cost $150. That can't be right. I'll be checking out some used ones. Anyone know a place where I can find one?

Guess this ...

I still have the 400 engine. I have two extended terminal by the back, right side door. The positive is connected to the solenoid and battery, while the negative is connected to the frame.

I thi ...

Had a weird thing happen. I haven't had the pulse out for a drive for a few months. So I charged up the battery and took it out. Ran really good for about ten minutes. I pulled over into a parking ...

Might just be easier to have someone make one. I had one made from a design I found on this site.

Might just be easier to have someone make one. I had one made from a design I found on this site.

It might have had a motor. The other "experimental" aircrafts had motors.

If you look close enough, it says "Collection of Chester L. Brizius." I checked online and it says th ...

http://mysite.verizon.net/resr2oj7/sitebuildercontent/sitebuilderpictures/DSC04212.JPG

http://mysite.verizon.net/resr2oj7/sitebuildercontent/sitebuilderpictures/DSC04211.JPG

http://mysite.verizo ...

Came across a BD5 in the basement of the museum. It was next to other experimental aircrafts. Not sure if the group was aware of this. I will send some pictures once I get them off of the camera.

My regulator had 3 wires coming out of it.

I bought a used one for $50 last year. Bike shop just happened to have a similar one just sitting in the parts drawer.

Talldude,

Check out Pulse 343 for sale. The owner, Chip, says he's 6-2 and fits comfortable in the cockpit. But you're still more than welcomed to come by and sit in mine.

Erick

I always thought about converting mine to electric. I have been checking out websites and some books.

Hybridguy,
Do you have any suggestions that could help with my learning, planning, design, ...

I live north of the Dallas/Ft. Worth area. You live close by?