PULSE AUTOCYCLE NETWORK

The pulse doesnt seem get "lite" at high speeds like a car. It is not airfoil shaped like a car and doesn't lift with speed. Keep the outriggers at the specified height, 1 outrigger wheel at 3/4" abov ...

Hi Carl & chengsls
My Lever looks like it was fabricated rather than somthing ready made. It wouldn't take much to duplicate something similar. The lever is a piece of flat steel with a hole drilled ...

To Charge the battery you may have two options without removing the canopy. 1. I have been able to remove the rear lower setion and then with the canopy nearly closed the rear upper section can be sli ...

I also have the zx7r engine, recently I experienced a similar experience.
Mine occured while driving. Gas milage severely decreased and the engine ran poorly and would not restart after it was stoppe ...

I have High res pics at 720kb each and would be glad to email them. It appears to have been fabricated in the plant/barn in owosso. Or perhaps a local fabricator, nothing fancy.

I was just flipping channels and a white pulse rolled across the screen traveling down a desert highway, for about 5 to 6 seconds. It was in the Movie "The Fire Next Time". The movie had clips of 3 di ...

I Stumbled across doing a search on goldwings.
http://www.dealsonwheels.com/search/dealerbig.cfm?Autos__ID=000369-200409-000043

Check here http://www.shiawasseehistory.com/pulsepartslist.html
I use the Michelin, I have the automotive rim on the rear so I have these on the front and rear. I believe others are using the same ti ...

How about offering one of Todd's acrylic windshields in trade for the glass one.

To remove the rear seat first the side panels have to be removed, I had 4, 1/4" lag screws on each side of the rear panel two at the bottom near the center tube, use a magnet to find them, if the carp ...

I want to add a trailer hitch to my pulse, For those of you that have them where are they attached?, swingarm or frame?

I contacted this company several months ago, I belive they said they would do it, however the tooling would cost about $5,000.00 I think, plus windshields. They have recently emailed fo an update on m ...