View previous topic :: View next topic |
Author |
Message |
iamjimmi
Joined: 02 Nov 2017 Posts: 2
|
Posted: Tue Nov 07, 2017 5:22 am Post subject: Angle of outriggers |
|
|
Hi - I have just taken delivery of #4 in the UK.
Lots of questions for the forum, but the first is a question about the angle of the outrigger wheels.
The wheels on the Outrigger sit at an angle, rather than straight down.
I have never seen a Pulse in the flesh before, so I don't know if this is correct...
Can anyone advise. Couple of pics below:
[img]https://photos.app.goo.gl/sobFhLQhdSrFF4XD3[/img]
[img]https://photos.app.goo.gl/ZMvtsRf9GIn9UZNk2[/img]
Thanks... Jim
Sorry not sure why the pics aren't showing? Is there a size limitation?
Try links instead:
https://photos.app.goo.gl/sobFhLQhdSrFF4XD3
https://photos.app.goo.gl/ZMvtsRf9GIn9UZNk2 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mikepulse325
Joined: 15 Jan 2006 Posts: 40
|
Posted: Tue Nov 07, 2017 8:14 pm Post subject: Cant wheels |
|
|
Jim, see the FB post regarding your question. Yes it is normal but you have option to adjust the cant. I posted on FB so others can comment. It is an individual preference on how much to raise outriggers and others will have differing opinions. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mikepulse325
Joined: 15 Jan 2006 Posts: 40
|
Posted: Tue Nov 07, 2017 8:14 pm Post subject: Cant wheels |
|
|
Jim, see the FB post regarding your question. Yes it is normal but you have option to adjust the cant. I posted on FB so others can comment. It is an individual preference on how much to raise outriggers and others will have differing opinions. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iamjimmi
Joined: 02 Nov 2017 Posts: 2
|
Posted: Wed Nov 08, 2017 3:26 am Post subject: |
|
|
Thanks Mike... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Wed Nov 08, 2017 8:09 am Post subject: |
|
|
The height of the outriggers can be changed. The actual angle of the outriggers cannot. You can raise or lower the outriggers in 2 places. First place is a turnbuckle near the outrigger wheels. The other place is under the seat inside the body. If the outside turnbuckles don't allow enough adjustment the you must adjust under the seat. Be sure you leave enough threads in the turnbuckle for strength.
The position of the out riggers is determined by the ride height of the pulse body as it goes down the road with one or two people on board. If the Pulse is riding too low the outriggers will be angled as seen in your pictures. If you raise the ride height the out riggers will need to be lowered and then will have a better angle.
I don't know what kind of ride adjustments you have on your Pulse. When the ride height is correct with 2 people on board one outrigger should be about 1 inch off the ground. air shocks on the rear will allow height adjustments for differing weights on board. Never have both outriggers in contact with the ground. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Wed Nov 08, 2017 8:09 am Post subject: Outrigger angle. |
|
|
The height of the outriggers can be changed. The actual angle of the outriggers cannot. You can raise or lower the outriggers in 2 places. First place is a turnbuckle near the outrigger wheels. The other place is under the seat inside the body. If the outside turnbuckles don't allow enough adjustment the you must adjust under the seat. Be sure you leave enough threads in the turnbuckle for strength.
The position of the out riggers is determined by the ride height of the pulse body as it goes down the road with one or two people on board. If the Pulse is riding too low the outriggers will be angled as seen in your pictures. If you raise the ride height the out riggers will need to be lowered and then will have a better angle.
I don't know what kind of ride adjustments you have on your Pulse. When the ride height is correct with 2 people on board one outrigger should be about 1 inch off the ground. air shocks on the rear will allow height adjustments for differing weights on board. Never have both outriggers in contact with the ground. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Wed Nov 08, 2017 8:10 am Post subject: Outrigger angle. |
|
|
The height of the outriggers can be changed. The actual angle of the outriggers cannot. You can raise or lower the outriggers in 2 places. First place is a turnbuckle near the outrigger wheels. The other place is under the seat inside the body. If the outside turnbuckles don't allow enough adjustment the you must adjust under the seat. Be sure you leave enough threads in the turnbuckle for strength.
The position of the out riggers is determined by the ride height of the pulse body as it goes down the road with one or two people on board. If the Pulse is riding too low the outriggers will be angled as seen in your pictures. If you raise the ride height the out riggers will need to be lowered and then will have a better angle.
I don't know what kind of ride adjustments you have on your Pulse. When the ride height is correct with 2 people on board one outrigger should be about 1 inch off the ground. air shocks on the rear will allow height adjustments for differing weights on board. Never have both outriggers in contact with the ground. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Wed Nov 08, 2017 8:12 am Post subject: Sorry |
|
|
Don't know why this posted 3 times. Sorry. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Muddiman
Joined: 26 Aug 2003 Posts: 6 Location: Central Florida
|
Posted: Fri Feb 23, 2018 11:49 pm Post subject: Angle of outriggers |
|
|
You need to have each outrigger tire touching the center tread area when the Pulse teatters to the side. This will give you the maximum tire wear. I recommend installing air shocks to set this correctly depending on the load.
Here is a link to info I posted many years ago.
Litestar Pulse Stability
Out-rigger Tires, Turning, Highway Speeds and Tire Wear
http://www.autocycles.org/pulseoutrigger.html
Keep them humming,
Don Muddiman _________________ Keep'em Humming,
Don Muddiman
Check Your Pulse web page.
http://www.eagle-i.us |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Muddiman
Joined: 26 Aug 2003 Posts: 6 Location: Central Florida
|
Posted: Fri Feb 23, 2018 11:49 pm Post subject: Angle of outriggers |
|
|
You need to have each outrigger tire touching the center tread area when the Pulse teatters to the side. This will give you the maximum tire wear. I recommend installing air shocks to set this correctly depending on the load.
Here is a link to info I posted many years ago.
Litestar Pulse Stability
Out-rigger Tires, Turning, Highway Speeds and Tire Wear
http://www.autocycles.org/pulseoutrigger.html
Keep them humming,
Don Muddiman _________________ Keep'em Humming,
Don Muddiman
Check Your Pulse web page.
http://www.eagle-i.us |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|