PULSE AUTOCYCLE NETWORK  Forum Index PULSE AUTOCYCLE NETWORK

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

New seat installation for #199

 
Post new topic   Reply to topic    PULSE AUTOCYCLE NETWORK Forum Index -> The Forum
View previous topic :: View next topic  
Author Message
Falcon Wing



Joined: 14 Sep 2004
Posts: 108
Location: Colorado Springs

PostPosted: Mon Nov 15, 2004 7:25 am    Post subject: New seat installation for #199 Reply with quote

Hello everyone,

I spent the better part of Saturday and a bit Sunday working on new bracket system to install my new seats.
It was very important to me to change out the old ones because they were worn out, looked dated and were unsafe. The wood had rotted, and the screws were falling out!
I ordered the "Tempress High-Back Navistyle Seats" from Cabelas for $99 each. http://www.cabelas.com/products/Ccat21334.jsp (scroll down the page a bit)

More info here: http://www.tempress.com/seating.cfm?Product_ID=25

I chose these seats because they look more like a modern seat than most of the boat seats I had looked at. I would like to have had some sort of racing seat, but I wouldn't have enough room for a passenger then.

When I went to install the new seats, I realized that the mounting holes were not going to match the stock locations. I decided to build my own bracket and got pretty good results. The new seat is comfortable, SOLID, and looks cool!

Build pics here" www.picturetrail.com/falconwing2


Steve, please feel free to add any of the information to the registry page.
Back to top
View user's profile Send private message Visit poster's website
ashok rai



Joined: 08 Nov 2004
Posts: 14
Location: anchorage,alaska

PostPosted: Mon Nov 15, 2004 2:37 pm    Post subject: Great Job! Reply with quote

Beautiful description..making it sound easy Rolling Eyes I'm sure it wasnnt! #25 has a similar problem and will make our job easier.Thank you
_________________
mrawry invader
Back to top
View user's profile Send private message Send e-mail
Falcon Wing



Joined: 14 Sep 2004
Posts: 108
Location: Colorado Springs

PostPosted: Mon Nov 15, 2004 11:46 pm    Post subject: Reply with quote

It actually was not that difficult. I imagine with the proper tools, and having done it once already I could have it completed from old seat removal to new seat installation in less than 2 hours.
Back to top
View user's profile Send private message Visit poster's website
Bob Hichborn



Joined: 12 Feb 2004
Posts: 404
Location: Orlando, Fl

PostPosted: Tue Nov 16, 2004 10:49 pm    Post subject: Reply with quote

Great shots!

So from that one image of your legs, I'm getting the feeling that the passenger, unless they are really small, basically "wraps" their legs
around the outsides of the front seat. Now you did say the front seat was moved back as far as it goes. Is this your normal driving position? or is there lots of leg room up front?

Since you've done such a great job with the photos, can you get acouple of friends to sit in both positions, then get some shots with the driver seat in several positions. .....hey, it can't hurt to ask!.....
_________________
"Everyday you wake up with a Pulse,
is a good day!"
Back to top
View user's profile Send private message Send e-mail
Falcon Wing



Joined: 14 Sep 2004
Posts: 108
Location: Colorado Springs

PostPosted: Wed Nov 17, 2004 12:41 am    Post subject: Reply with quote

Bob,

There is enough room for the driver...but I think I will have about 1-1-1/2 inches of foam removed out of the seats from the lower and back pad just to give MORE room. I am also getting a flat bottom steering wheel that will give more leg room too. The seat is as far back as it will go, which is where I keep it because I am long legged. I could have built the bracket so that I was sitting even furthur back...which I maybe should have done. I could have just scooted up a bit if there was a passanger.

I put my knees up in the picture from the back seat, and since the new seats are just as narrow as the old, there is room to move your feet forward and straddle the passanger, which I think is what was originally intended in the design.

Ill see what I can do about taking a picture with 2 people.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    PULSE AUTOCYCLE NETWORK Forum Index -> The Forum All times are GMT + 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.22-1 (Debian) © 2001, 2005 phpBB Group