View previous topic :: View next topic |
Author |
Message |
kooman
Joined: 12 Sep 2003 Posts: 6
|
Posted: Fri Sep 12, 2003 10:10 pm Post subject: removing canopy |
|
|
I am looking for information on how to remove the canopy on my pulse. The bearings on the right side fell out along with the metal plate that holds them in. The left side rail will not slide all the way out and seems to be blocked by something inside the railing. What step am I missing since I have no manual to guide me? Second question, the steering wheel on my pulse is not aligned straight. Is there a way tofix it so it will be? Thanks, Kooman. |
|
Back to top |
|
|
Chuck Furgason
Joined: 26 Aug 2003 Posts: 37
|
Posted: Sat Sep 13, 2003 9:51 pm Post subject: |
|
|
If you look at your side rails there holes in the iner rail that lines up with the outer rail screws you can take the conopy off this way, or you can take your side panels off and remove the side rails that are on top of the fiberglass with the side rails and canopy.
Dick Abbot did have some of the side rails made. I was not able to find a drawer slide that would fit.
Chuck |
|
Back to top |
|
|
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Sun Sep 14, 2003 4:34 pm Post subject: Steering wheel adjustment |
|
|
To realign the steering wheel so it's centered when you are going straight, you have to adjust the steering link arm between the steering box and the front forks. The steering link arm is a threaded rod between the steering box and the front fork. To get to it you must remove the dash cover under the windshield. You will then see the steering box. that the steering wheel shaft goes into. Hope this helps you. |
|
Back to top |
|
|
|