View previous topic :: View next topic |
Author |
Message |
Lamboal
Joined: 13 Feb 2009 Posts: 3 Location: Central Florida
|
Posted: Mon Dec 13, 2010 9:59 am Post subject: Pulse clutch |
|
|
clutch on my pulse does not work I have rebuilt it and still no peddle any suggestions please , Alan red59al@comcast.net |
|
Back to top |
|
|
Steve Schmidt Site Admin
Joined: 01 Sep 2003 Posts: 355
|
Posted: Mon Dec 13, 2010 10:26 pm Post subject: |
|
|
Hi,
What is your Pulse number and what engine do you have? |
|
Back to top |
|
|
Lamboal
Joined: 13 Feb 2009 Posts: 3 Location: Central Florida
|
Posted: Tue Dec 14, 2010 9:37 pm Post subject: |
|
|
regarding my clutch problem, my vehicle number is 60. The engine is a Honda VF1000F approximately mid-1980s, any suggestions would be greatly appreciated, Alan |
|
Back to top |
|
|
Bob Cervero
Joined: 26 Aug 2003 Posts: 63
|
Posted: Tue Dec 14, 2010 10:33 pm Post subject: |
|
|
Is your clutch operated by cable or hydraulic? If it is hydraulic then you might need to rebuild either the clutch master cylinder which is activated by the foot pedal or the slave cylinder which is located next to the actual clutch mechanism. Usually the seals go bad and then the fluid leaks by them and you get no clutch activation. A soft or no pedal sensation.
If it is cable operated then make sure the cable is not broken. If it is not broken then maybe you need to take up all the slack in the cable using the screw adjusters until you get a high pedal. |
|
Back to top |
|
|
Lamboal
Joined: 13 Feb 2009 Posts: 3 Location: Central Florida
|
Posted: Thu Jan 06, 2011 9:31 pm Post subject: |
|
|
thank you for your responses regarding my clutch problem I still am unable to get it to work. Any other suggestions would be greatly appreciated, Alan |
|
Back to top |
|
|
|