View previous topic :: View next topic |
Author |
Message |
hatfield
Joined: 05 Sep 2005 Posts: 60 Location: Muscatine, IA
|
Posted: Mon Dec 25, 2006 3:57 am Post subject: Trailer Hitch |
|
|
Does any one have a trailer hitch made for a Pulse with a Honda 1100 engine they would like to sell? _________________ Pete Hatfield
Muscatine, IA
www.petehatfield.com |
|
Back to top |
|
|
elden simons
Joined: 11 Sep 2003 Posts: 369 Location: Brampton, Michigan
|
|
Back to top |
|
|
steveg
Joined: 12 Nov 2003 Posts: 50 Location: otisco NY
|
Posted: Wed Dec 27, 2006 9:24 am Post subject: |
|
|
I happen to have a hitch on my Litestar, wich was a factory unit made for the Litestar.. and much stronger/stiffer than the one piced..
I have towed a small Kmart trialer with camping stuff total weight of around 150 lbs.. I would not recommend much more than that.. if you have the Yamaha OEM motor dont do it.. not enough clutch. generates too much heat pulling also.
my unit has tubes welded on the sides at an angle going up to the frame where its bolted agian..
I have used it, but would not do it agian.. no matter how tite the hitch, or how good the trailer.. the Pulse/Litestar with its outriggers make trouble from the teetering back and forth at speed..
and creates wobble...
do so with care.. _________________ steve george litestar #009
otisco NY |
|
Back to top |
|
|
|