View previous topic :: View next topic |
Author |
Message |
jimbobjobilly
Joined: 06 Sep 2010 Posts: 3
|
Posted: Tue Sep 21, 2010 2:41 am Post subject: Problem with Front axle/brake assembly |
|
|
I'm restoring Pulse #23, it was completely disassembled and some parts are missing. I'm stuck on the front wheel/brake assembly. The mounting plate has about a 1" hole in it, not large enough to allow the hub shoulder to protrude, is this the correct mounting plate, is the front and rear plate the same? I'm guessing the mounting plate for the brake caliper seems as though it would have 2" spacers on the bolts to allow enough clearance for the hub axle shoulder to protrude. A sketch or picture of the front assembly would be very helpfull and I welcome comments. Thanks Jim[/b] |
|
Back to top |
|
|
elden simons
Joined: 11 Sep 2003 Posts: 369 Location: Brampton, Michigan
|
Posted: Tue Sep 21, 2010 7:15 am Post subject: Brake reassembly |
|
|
Ya, took my front brake apart and don't remember how it goes back on, but, I'll find a mechanic some day.
Well, after looking at the VIN Registry on the Archive site, A couple of vehicles built in 1985 may be close to your vehicle ( I hope)...
#30 is owned by Kent Taylor of Indianna
#31 is owned by Thomas Lamb of Georgia
#32 is owned by Doug Minurt (oops, scribbled his last name..can't really read it) of Michigan
So...if any of these members can help... Alright |
|
Back to top |
|
|
pulse220
Joined: 04 Jan 2007 Posts: 50
|
Posted: Tue Sep 21, 2010 8:21 am Post subject: |
|
|
Jim,
email me at ckr1@aol.com and I will send you some pictures of when I rebuilt my frontend...
Chad #220 |
|
Back to top |
|
|
Steve Schmidt Site Admin
Joined: 01 Sep 2003 Posts: 355
|
|
Back to top |
|
|
|