View previous topic :: View next topic |
Author |
Message |
Pulse Pilot
Joined: 02 Oct 2010 Posts: 2 Location: Temecula, CA 92587
|
Posted: Sun Oct 03, 2010 12:08 am Post subject: Pulse body panels |
|
|
New to this great forum: These cars seem so hard to find. So, I am considering using a donor Bike and building a custom frame.
Wondering if there is someone that has the molds and is still producing Pulse Body Panels and windshield frames Any info appreciated ! _________________ Thanks, Tom R |
|
Back to top |
|
|
Bob Hichborn
Joined: 12 Feb 2004 Posts: 404 Location: Orlando, Fl
|
Posted: Mon Oct 04, 2010 7:06 am Post subject: |
|
|
Tom,
The where-abouts of the original molds continues to be a Pulse mystery. I made a set of splash molds a few years back and have fabricated parts for several Pulse owners. I presently have 2 complete sets of parts that I have been slowly building up in between all my other projects.
For folks wanting to build their own, I usually recommend buying an existing one and doing a restoration. With you being out in CA, I'd guess it would cost close to $1000 just to ship the parts from Florida and another $300 to build a shipping crate/container.
Let us know what you're looking for and perhaps the club can find you one for sale in your area before you go the new parts route.
- Bob _________________ "Everyday you wake up with a Pulse,
is a good day!" |
|
Back to top |
|
|
Pulse Pilot
Joined: 02 Oct 2010 Posts: 2 Location: Temecula, CA 92587
|
Posted: Tue Oct 12, 2010 10:59 pm Post subject: Looking for a beat up Pulse out west! |
|
|
Bob thanks for your helpful reply. Yes, I am interested in buying a pulse in any degraded condition, but can only spend a few grand. I can see it would be pricey to ship body parts from the East. I'm probably willing to drive up to 1500 miles to trailer a pulse home. Put out the word, thanks Tom _________________ Thanks, Tom R |
|
Back to top |
|
|
|